Roco 42430 – Curved track R20, 5°
€3,60 incl. BTW
Curved track R20.
Radius 1962 mm, arc angle 5°.Two piece constitute complementary curve for 10° turnouts and crossings.
7 op voorraad
Fabrikant | Roco |
---|---|
Schaal | H0 | 1:87 |
€3,60 incl. BTW
Curved track R20.
Radius 1962 mm, arc angle 5°.Two piece constitute complementary curve for 10° turnouts and crossings.
7 op voorraad
Fabrikant | Roco |
---|---|
Schaal | H0 | 1:87 |
Single slip turnout EKW10, without turnout mechanisms. Standard design with internal switch rails.
Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm.For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts.Suitable turnout mechanisms (2 pieces are required):
40295 (electric turnout mechanism left)
or 40297 (manual turnout mechanism left)
or 10030 (below baseboard mechanism).
Please note the operating instructions!
Curved turnout left hand BWl2/3, without turnout mechanism.
Radius of main track and branch track 358 mm (R2), arc angle 30°.Suitable turnout mechanism:
40295 or 40296 (electric turnout mechanism),
40297 or 40298 (manual turnout mechanism)
or 10030 (below baseboard mechanism).
Please note the operating instructions!Note:
The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.
Turnout left hand Wl15, without turnout mechanism.
Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°.An 8-mm spacer element (D8) is included for diagonal installation.Suitable turnout mechanisms: 40295, 40297 or 10030.
Asymmetrical three-way turnout DWW15 without turnout mechanisms. First divergence to the left, second divergence to the right.
Length 287.5 mm (= G1 + G¼), branch angle 15° each, branch radius 873.5 mm each, frog angle 10.8°.To adapt the length a 57.5 mm G¼ straight track element and spacers D12 and D4 are included.Suitable turnout mechanisms (2 pieces are required):
40296 (electric turnout mechanism right)
or 10030 (below baseboard mechanism).
Please note the operating instructions!