Roco 42424 – Curved track R4, 30°
€3,00 incl. BTW
Curved track R4.
Radius 481.2 mm, arc angle 30°.12 pieces are needed to form a full circle.
18 op voorraad
Fabrikant | Roco |
---|---|
Schaal | H0 | 1:87 |
€3,00 incl. BTW
Curved track R4.
Radius 481.2 mm, arc angle 30°.12 pieces are needed to form a full circle.
18 op voorraad
Fabrikant | Roco |
---|---|
Schaal | H0 | 1:87 |
Single slip turnout EKW15, without turnout mechanisms. Standard design with internal switch rails.
Length 230 mm (standard length), crossing angle 15°, branch radius 531 mm. For diagonal installation two D4 and one D12 are included.Suitable turnout mechanisms (2 pieces are required):
40295 (electric turnout mechanism left)
or 40297 (manual turnout mechanism left)
or 10030 (below baseboard mechanism).
Double slip turnout DKW10, without turnout mechanisms. Standard design with internal switch rails.
Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm.For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts.Suitable turnout mechanisms (2 pieces are required):
40295 (electric turnout mechanism left)
or 40297 (manual turnout mechanism left)
or 10030 (below baseboard mechanism).
Please note the operating instructions!
Curved turnout left hand BWl2/3, without turnout mechanism.
Radius of main track and branch track 358 mm (R2), arc angle 30°.Suitable turnout mechanism:
40295 or 40296 (electric turnout mechanism),
40297 or 40298 (manual turnout mechanism)
or 10030 (below baseboard mechanism).
Please note the operating instructions!Note:
The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.