Roco 42408 – Curved track R2¼, 7.5°
€2,80 incl. BTW
Curved track R2¼.
Radius 358 mm, arc angle 7.5°.
9 op voorraad
Fabrikant | Roco |
---|---|
Schaal | H0 | 1:87 |
Je winkelwagen is leeg
Terug naar de webshop€2,80 incl. BTW
Curved track R2¼.
Radius 358 mm, arc angle 7.5°.
9 op voorraad
Fabrikant | Roco |
---|---|
Schaal | H0 | 1:87 |
Single slip turnout EKW10, without turnout mechanisms. Standard design with internal switch rails.
Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm.For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts.Suitable turnout mechanisms (2 pieces are required):
40295 (electric turnout mechanism left)
or 40297 (manual turnout mechanism left)
or 10030 (below baseboard mechanism).
Please note the operating instructions!
Double slip turnout DKW10, without turnout mechanisms. Standard design with internal switch rails.
Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm.For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts.Suitable turnout mechanisms (2 pieces are required):
40295 (electric turnout mechanism left)
or 40297 (manual turnout mechanism left)
or 10030 (below baseboard mechanism).
Please note the operating instructions!
Crossing K30.
Length of tracks 119 mm (= DG1). Crossing angle 30°. The railroad lines that cross each other are not electrically isolated.Among other things they are suitable for forming double track connections with the 15° turnouts or double slip turnouts.